Polywood Traditional Rocker Seat Cushion
Item#: PW203- 100% acrylic Sunbrella fabric
- 5-year fade-resistant warranty
- Seat cushion with attractive corded edges
- Available in wide range of colors
- Designed for Polywood Traditional Rocker chairs
- Dimensions: 20.5L x 20.5W inches
The Polywood Traditional Rocker Seat Cushion fits Polywood's Traditional Rocker chairs and measures 20.5L x 20.5W inches. This cushion is made from Polywood's exclusive 100 percent acrylic solution-dyed Sunbrella fabric, which is safe for outdoor use and resists fading and weathering. This attractive corded-edge seat cushion is perfect for outdoor furniture and is available in a wide range of colors to suit any patio decor.
Measure before you order
You should measure your outdoor furniture carefully before ordering to ensure a proper fit. Measure the width of your seat from side to side, between the arms. Measure the depth or length from the front of the seat to the back of the seat.
About Sunbrella
Sunbrella has been the leader in performance fabrics for over 45 years. Impeccable quality, sophisticated styling and best-in-class warranties prove the new generation of Sunbrella offers more possibilities than ever. Sunbrella fabrics are breathable and water-repellant. If kept dry, they will not support the growth of mildew as natural fibers will. Beautiful and durable, Sunbrella is a name you can trust in your outdoor furniture. Sunbrella fabric comes with a 5-year warranty against fading.
Cleaning and Caring for Sunbrella
Regular maintenance is the best way to keep your Sunbrella fabrics looking good and delay deep, vigorous cleaning. Brush off dirt before it becomes embedded in the fabrics, and wipe up spills as soon as they occur. For light cleaning, use a mild soap and water solution and a sponge, allowing your cleaning solution to soak into the fabric. Rinse thoroughly to remove all soap residue and allow fabric to air dry. For more specifics on maintaining Sunbrella fabrics, visit Sunbrella.com.
Dimensions
20.5L x 20.5W inches
Brand
Polywood
PolyWood material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water.
For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color.
Also, a popular method of cleaning is a high-pressure power wash. (Not to exceed 1,500 psi, which is the equivalent of a car wash.) The surface characteristics of the product may require the use of a soft bristle brush to get into the creases.
The hardware used in the assembly and construction of our furniture is an 18-8 commercial-grade stainless steel that has an additional Xylan protective and cosmetic coating. Although the quality of the hardware has a high level of corrosive resistance, the hardware can show some sign of corrosion in salt air environments.
A practical solution to these signs of corrosion would be to wash the product with soap and water. Use a soft bristle brush to scrub the corroding areas of the hardware. Also, use appliance touch-up paint in the appropriate color to protect the hardware. Appliance touch up-paint can be purchased at local hardware stores.
